Texas Commercial Inspection License Practice Exam

These questions are part of the practice quiz. Start practicing

• What are typical issues observed in commercial electrical inspections?
• What is the required stopping distance for a big truck traveling at 20 mph?
• What are the benefits of conducting pre-purchase inspections?
• How often should fire alarm systems be tested in commercial buildings?
• In what situation would a license be suspended until payment is made?
• What color are side marker lamps required to be towards the rear?
• What is a key component of the Power Steering inspection process?
• What is the minimum number of headlamps required for a vehicle?
• What aspect of fire safety systems should an inspector focus on?
• What is the inspector's responsibility when identifying potential mold in a building?
• What document details the effective and expiration dates of a commercial vehicle's insurance?
• What should be ensured about the frame in relation to the tire/wheel?
• When assessing fire exits, what additional elements should inspectors consider?
• What is the function of a fifth wheel in coupling devices?
• For vehicles manufactured from 1984 and up, what is required in terms of catalytic converters?
• What should be inspected regarding U-bolts in suspension?
• According to regulations, what type of tape should not be used for repairs on vehicles?
• What is the penalty for a 4th offense in Category B?
• What is the consequence of failing to find loose or missing bolts in the steering gear box?
• In relation to doors, what is a major factor that impacts security during an inspection?
• What should inspectors observe concerning commercial kitchen systems?
• How should inspectors document their findings?
• How often must commercial building inspections typically be performed?
• Which of the following is an offense that results in revocation?
• What is the purpose of slack adjusters in a brake system?
• What should not be assessed in the windshield inspection area?
• What is an "elevated platform" used for in a commercial building?
• What can result in a lifetime revocation in Category E?
• What is the minimum liability insurance period required for commercial vehicles?
• What does a poor seal in windows typically indicate during a commercial inspection?
• What is one of the requirements for the parking brake operation?
• What are common structural issues found during commercial inspections?
• What weight class defines a commercial vehicle?
• Which offense would likely lead to a penalty of suspension?
• What is the penalty for a 3rd offense in Category B?
• For what reason would an inspector fail the inspection of an exhaust system?
• Which symptom indicates potential air spring failure?
• For a fourth offense in Category A, what is the resultant penalty?
• What is one primary reason for inspecting the alignment of doors?
• What should an inspector evaluate regarding egress in commercial buildings?
• What weight defines a farm vehicle as a commercial vehicle?
• How does a 4th offense in Category E differ from a 3rd offense?
• What should be done if coupling devices are found to be damaged during inspection?
• How should all lamps be mounted on a vehicle?
• What is the required stopping distance for a car traveling at 20 mph?
• What is an important aspect of the steering system that inspectors must check?
• What should you inspect on safety chains or cables in coupling devices?
• What is the allowable height range for stop lamps?
• What should be inspected regarding steering lash?
• Which component should be inspected for wear or damage on an air compressor?
• What does nuisance abatement refer to in commercial property management?
• Which of the following is a requirement for the horn on a vehicle?
• How should safety and health violations be addressed in an inspection report?
• What is the penalty for a 3rd offense in Category C?
• What could be a consequence of administrative action due to failure to pay?
• Before a vehicle is deemed safe, which system must be verified for proper function?
• Which of the following is NOT a requirement for the fuel system during an inspection?
• What is NOT a condition to be checked during a wheel inspection?
• When should a follow-up inspection be scheduled?
• When should wipers be rejected during inspection?
• What type of permit is commonly required for renovations in commercial buildings?
• Which feature of windows is particularly assessed for determining its effect on energy costs?
• Which system in a commercial building is responsible for fire suppression?
• Which component is NOT checked as part of the wheel inspection?
• What is the penalty for a 4th offense in Category E?
• In what scenarios would an inspector require specialized testing?
• What administrative penalty occurs for failure to pay mandated fees?
• What do U-bolts attach in a vehicle's suspension?
• What is the penalty for a 2nd offense in Category E?
• What does ADA stand for in the context of commercial inspection?
• What caution should be taken regarding the brake drum during an inspection?
• What activates the low air warning device in a brake system?
• Which components of life-safety systems are critical for inspections?
• What is the required condition for lamp lenses during inspection?
• How often should U-bolts be inspected for damage during routine checks?
• What color is required for the license plate lamp?
• What is the acceptable horizontal movement range between upper and lower fifth wheel halves?
• Which condition is acceptable for windshield damage?
• What is one of the inspector's responsibilities during energy audits for commercial properties?
• What is the required height range for vehicle headlamps?
• How can moisture issues in buildings be inspected?
• What is NOT allowed on the front axle of buses concerning tires?
• Which of the following best describes the purpose of exit signs in commercial buildings?
• What is the purpose of a thermal imaging inspection?
• Which code primarily governs commercial building inspections in Texas?
• What should be inspected regarding turn signals in a vehicle?
• What is the requirement for turn signal lamps on vehicles manufactured in 1960 or newer?
• During an inspection, what should be checked regarding the air compressor?
• What is the penalty for a 1st offense in Category E?
• What is the purpose of insulation in commercial buildings?
• What should be verified regarding the high beam indicator lamp during inspection?
• Which type of tires are permitted on the front axle of trucks except buses?
• What is the required placement for window tint borders in relation to the top of the window?
• What should you look for when inspecting the gear box in a steering system?
• What is the penalty for failing to possess a valid driver's license (Category D)?
• What is a critical requirement for proper exhaust system support?
• What should an inspector check in the Exhaust Emissions System?
• What is the penalty for a 1st offense in Category C violation 23.62(c)(3)(D)?
• Why is documentation vital for an inspector's final report?
• What must be done if hazardous materials are discovered during an inspection?
• What type of wear condition will lead to a reject for the pitman arm in inspections?
• What part of the vehicle is primarily controlled by the foot valve?
• Why is it essential to check for pest infestations during a commercial inspection?
• What is a requirement for mirrors on a vehicle regarding visibility?
• What is a common issue found in older commercial buildings?
• What is the primary function of brake chambers in an air brake system?
• What type of documentation should a commercial building inspector carry during an inspection?
• What do slack adjusters link in a brake system?
• During a coupling device inspection, which part must rotate freely?
• What is the maximum acceptable fluid level drop in the Master Cylinder during an inspection?
• How do recent building modifications impact ongoing inspections?
• What role does a civil engineer play in commercial inspections?
• What color should the rear hazard warning lamps be?
• What secures the non-expanding end of the brake shoes to the axle?
• What is the role of the suspension system in a vehicle inspection?
• What is the primary goal of accessibility inspections?
• What is the purpose of inspecting plumbing systems in commercial buildings?
• Which of the following is part of the required inspection for the steering system?
• Which of the following items should be inspected from outside a vehicle?
• Which components should not be missing or broken in the brake system?
• What should be checked for air bags in the suspension system?
• What is the minimum tread depth required for front tires?
• What are the potential consequences of failing to comply with commercial building codes?
• What should be inspected on the exhaust system to ensure its proper function?
• What is the penalty for a 1st offense in Category C?
• What is the significance of inspecting a building's foundation?
• When inspecting the pivot bracket pin in coupling devices, what is a key inspection point?
• Which of the following components is analyzed for its integrity during a door assessment?
• What is the minimum audible distance for a horn on a motor vehicle?
• What color are clearance lamps required to be towards the front and middle?
• How many mirrors are required for a vehicle?
• What is the likely penalty for the first offense in Category E?
• What should be checked for damage in the brake system?
• What role does the governor play in an air compressor system?
• What should an inspector look for in windows to gauge energy efficiency?
• What must be checked for the operation of windshield wiper controls?
• Regarding the king pin and locking mechanism in coupling devices, what must be inspected?
• For vehicles manufactured in 1960 or newer, how many stop lamps are required?
• What type of inspection should be conducted regularly on suspension components?
• What should be included in the inspection of coupling devices?
• What percentage of a trailer must be covered with reflex tape according to regulations?
• Which situation indicates that a vehicle's brake system is functioning improperly?
• Which component of the steering system must be inspected to ensure proper functioning of the pitman arm?
• Which of the following must be included in verifying financial responsibility?
• What role does landscape management play in a commercial property inspection?
• What is the result of administrative action for not fulfilling payment obligations?
• Why is it important to evaluate the functionality of windows and doors during a commercial inspection?
• What is required for seat belts during vehicle inspection?
• Which types of vehicles are exempt from the mud flap requirements?
• What color should the tail lamps be for vehicles manufactured in 1960 or newer?
• What does "grounding" refer to in electrical systems?
• When conducting an inspection, what should be included in the inspector's report?
• What is the penalty for a third offense in Category A?
• In the inspection of the vehicle frame, which condition is unacceptable?
• What must CNG (compressed natural gas) fuel containers comply with?
• What is the width requirement for identification lamps?
• What is the penalty for a second offense in Category A?
• What is the penalty for a 2nd offense in Category C violation 23.62(c)(3)(D)?
• What does the term "deficiency report" signify in building inspections?
• What condition should wiring be in to avoid physical damage?
• What should be observed for leaks in the brake system?
• What is an important factor in the inspection of the lighting and equipment for commercial vehicles?
• What is the minimum distance identification lamps can be mounted from the center?
• What are common causes for failure in an exhaust system?
• What color should clearance lamps be towards the rear?
• What is the function of the tractor protection valve?
• What is a common sign of a failing exhaust system?
• What should inspectors prioritize when examining exterior components of a commercial building?
• Which of the following checks is crucial for tire inspection?
• During a commercial inspection, what is a primary reason for checking window seals?
• What type of penalties do administrative actions typically involve?
• How can an inspector verify that a building meets occupancy classifications?
• What is necessary to ensure the steering column remains effective?
• What color are reflectors required to be?
• What is the appropriate action if an inspector identifies a potential hazard?
• What is the penalty for a first offense in Category A?
• When brakes are applied, what occurs to the push rod?
• What is an indicator of a commercial vehicle's gross weight rating?
• What is the significance of energy codes in commercial properties?
• What aspect of windows is particularly important in a commercial inspection?
• Why is it important to consider the history of a commercial building during inspections?
• What should happen to any brake beyond the readjustment limit?
• What is the penalty for a first offense in Category B?
• What is usually the first action taken against licensee non-compliance with financial obligations?
• Which components should be inspected for proper brake system function?
• Why is it important to check the roof during a commercial inspection?
• What is the penalty for a 3rd offense in Category E?
• What action is most likely for a 3rd violation of regulatory standards in Category E?
• Why is it essential to examine windows and doors during a commercial inspection?
• During an inspection, if the Master Cylinder has fluid below 1 inch of the reservoir top, what action should be taken?
• What is the height requirement for tail lamps?
• Which of the following is a critical characteristic that must be assessed for both windows and doors?
• Why is moisture intrusion a critical focus during inspections of windows and doors?
• What is the primary role of a commercial building inspector in Texas?
• What is the most common cause of loss of braking efficiency in an air brake system?
• Which of the following statements about stop lamps for vehicles made in 1959 or older is true?
• What requirement exists for mud flaps on trucks with four or more tires?
• What percentage of diodes in LED tail lamps can malfunction without failing inspection?
• What is an inspector required to evaluate concerning power steering systems?
• What is the importance of ensuring lighting systems function correctly?
• For vehicles manufactured in 1959 or older, how many tail lamps are required?
• What should the frame of the vehicle not be?
• What is a characteristic of a windshield that would lead to its rejection?
• Which of the following is a key inspection criterion for the steering column?
• Which indicator suggests that a service brake should be rejected during inspection?
• What is the maximum distance identification lamps can be mounted from the center?
• How does an inspector evaluate the condition of parking lots?
• What is the best practice regarding wipers during a commercial vehicle inspection?
• What is NOT included in the inside vehicle inspection checklist?
• What is a critical factor to assess in fire alarm systems during an inspection?
• What is the minimum percentage of glass coating or tint for vehicle windows?
• What is the minimum weight for a commercial vehicle classified under Texas regulations?
• What is the required color for the front hazard warning lamps?
• What components should be checked on the frame during an inspection?
• For a semi traveling at 20 mph, what is the required stopping distance?
• Why should inspections include checks on HVAC systems?
• What should the parking brake be designed to do once applied?
• What indicates a failure in the Master Cylinder during an inspection?
• What should not be mixed on the steering axle of a vehicle?
• Which items should an inspector inspect during a vehicle inspection?
• What components should be inspected during the brake test?
• What is typically the maximum penalty for repeated offenses in Category E?
• In interstate commerce, what is the minimum weight that classifies a vehicle as commercial?
• What is a sign of a problem with air suspension?
• What does "LEED" stand for in regards to energy efficiency?
• What is a common issue that inspectors look for concerning doors?
• What will happen if the horizontal movement between the upper and lower fifth wheel halves exceeds 1/2 of an inch?
• What types of buildings require a commercial inspection?
• What must an inspector verify about fire safety systems in a commercial building?
• What regulation is important in wastewater management for commercial properties?
• What role does signage play in commercial properties?
• During a commercial inspection, how is security typically evaluated with regard to doors?
• Why is it important to check for tightness in air compressor belts?
• What is a common issue inspectors find with emergency lighting systems?
• How does water intrusion affect commercial buildings?
• What condition should leaf springs be in for suspension inspection?
• What happens to the push rod when the brakes are released?
• What color should the backup lamp be?
• What do building codes require regarding elevator systems in commercial buildings?
• How long is the suspension for a second offense in Category B?
• How do inspectors evaluate the sufficiency of a building's drainage systems?
• Which of the following best describes an outcome of inadequate door security?
• Where should exhaust fumes discharge from a vehicle?
• What is a requirement for the high beam indicator on a vehicle?
• What is the minimum height requirement for reflectors on a vehicle?
• How many reflectors are required on vehicles?
• What is the required stopping distance for a pickup truck traveling at 20 mph?
• What is the penalty for a 2nd offense in Category C?
• What is the required maximum height for mud flaps above the roadway?
• What is critical to avoid in order to maintain the integrity of the brake system?
• What must be verified before proceeding with an inspection?
• What does "GFCI" stand for in electrical installations?
• What can wear thin with use in a brake system?
• What does HVAC stand for in commercial properties?
• What is the purpose of a life safety plan in commercial buildings?